100-300 m/min PP strapping production line single screw extruder
100cc metering pump
DESCRIPTION OF PP STRAPPING EQUIPMENT
PP strapping equipment can be customized according to customer
requirements and can extrude 2-12 PP straps at the same time.
PP strapping belt production line is a high-end intelligent extrusion equipment that
can produce PP belt: width: 5-19mm, thickness: 0.3-1.2mm
Raw materials-----PP strapping equipment can produce plastic raw materials:
100%recycled materials or PP polypropylene new materials to produce
strapping tape;
Screw-----The equipment adopts high-precision high-quality screws, adopts
well-known brands, and has unique parameter design. It has the
advantages of large extrusion volume, good plasticization, high
hardness and wear resistance; equipped with a quantitative
extrusion system, the width and thickness of the produced belts are
the same, the error range is small, and it meets the national
strapping tape acceptance standards;
Automatic screen changer------Equipped with a non-stop automatic screen changer, the screen does
not need to be stopped, and the efficiency is maximized. 4-net
circulation large-area filtration does not require frequent screen
changes.
PLC system----The equipment adopts an intelligent PLC Chinese/English version
control system, which is simple and easy to understand, beautiful
and generous, sturdy and durable, long life, and low failure rate.
The equipment has an exclusive parameter memory system, which can
store data after each specification is produced, and the parameters
can be directly adjusted during the next production.
RAW MATERIALS
-------100%recycled materials or PP polypropylene new materials
Features: Strong transparency, good color, high tensile strength
EXTRUSION PARAMETERS TABLE
| Model | PP-2 | PP-4 | PP-6 | PP-8 | PP-10 | PP-12 |
| Raw material | PP polypropylene new material/recycled material |
| Number of tapes | 2 | 4 | 6 | 8 | 10 | 12 |
| Width(mm) | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 |
| Thickness(mm) | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 |
| Line speed(m/min) | ≧260-300 |
| PLC control system | PLC | PLC | PLC | PLC | PLC | PLC |
| Screw Model | 90 | 110 | 125 | 135 | 135 | 135 |
| Reducer model | 200 | 220 | 250 | 280 | 280 | 280 |
| Winding machine | Automatic winding machine /Semi-automatic winding machine |
| Screen Changer | Automatic/Manua |
| Production capacity 24H | 2.5-3T | 6-7T | 8-9T | 10-11T | 12-13T | 13--14T |
Applicable to balers:
1. Fully automatic baler
2. High-speed baler
3. Semi-automatic baler
4. Handheld electric baler
5. Manual clamp baler
ABOUT AFTER-SALES
We provide comprehensive technical support and service for our PP strapping equipment. Our team of experienced technicians can provide a variety of
services, including:
Pre-sales:
1.Layout plan of PP strapping equipment.
2.Analysis of the cost of PP strapping equipment.
3.Raw materials that can be used for PP strapping equipment.
After-sales service:
1.Water and electricity circuits of PP strapping equipment, circuit drawings, etc.
2.Installation, commissioning and training of PP strapping equipment.
3.Maintenance service of PP strapping equipment.
4.Regular maintenance and repair
5.Troubleshooting and diagnosis
6.Software updates and upgrades
7.Spare parts and accessories
8.Training and technical advice
FAQ:
Q:What is the voltage of PP strapping equipment?
A:380V/50HZ, we support customization
Q:Can thePP strapping equipment be customized according to the factory length?
A:Yes, we can customize the length according to the customer's
factory size.
Q:Where is the PP strapping equipment produced?
A:We are from China.
Q:Can PP strapping equipment provide after-sales service?
A:Yes, we have professional after-sales engineers who provide
24-hour online guidance.
Q:Is the quality of PP strapping equipment stable?
A:We have 30 years of manufacturing experience, and have their own
PP packaging belt production plant, equipment quality is stable,
the process is worth choosing.
Q:Does PP strapping equipment support customization?
A:We are a manufacturing plant that can customize model size,
extrusion capacity, voltage and so on according to customer
requirements.
